DELTA®-THENE 40 (Coming soon!)

DELTA®-THENE 40 is intended for use as a full coverage below grade waterproofing membrane, ideally suited for use behind DELTA®-DRAIN drainage composites.

Properties

DELTA®-THENE 40 has highly aggressive adhesive properties. The product acts as a full coverage below grade waterproof membrane. When used in combination with DELTA®-DRAIN, it helps provide a high degree of security and drainage for any residential waterproofing system.

Material

DELTA®-THENE 40 is a 40 mil (1 mm) self-adhering (peel & stick) membrane. It consists of SBS (styrene-butadiene-styrene) modified asphalt combined with a cross-laminated polyethylene film.

Application

DELTA®-THENE 40 comes in manageable 920 mm (36”) rolls with a release liner for easy application. It is applied to below grade foundation walls to provide an effective waterproof barrier. When used in combination with DELTA®-DRAIN and DELTA®-FOOTING BARRIER, it is part of an effective foundation protection system. In combination with DELTA®-THENE PRIMER it can be applied at temperatures as low as -5°C.

Technical Data

Product name	DELTA®-THENE 40
Thickness	1.0 mm
Dimension	22.9 m x 0.91 m (75ft x 3 ft)
Gross / Net coverage per roll	20.8 m² / 19.7 m² (225 ft² / 212 ft²)
Roll weight	21 kg (46 lb)
Temperature resistance	-35°C to +80°C
Working temperature	+5°C to +30°C (air and sub-surface) Down to -5°C with DELTA®-THENE cold primer
Tensile strength	MD: 11.3 kN/m (64 lb/in) XD: 15.4 kN/m (88 lb/in)	ASTM D5147
Ultimate elongation	MD: 40% XD: 25%	ASTM D5147
Static puncture	400 N (90 lb)	ASTM D5602
Tear resistance	MD: 375 N (84 lb) XD: 400 N (90 lb)	ASTM D5601
Lap adhesion	2000 N/m (11.4 lb/in)	ASTM D1876
Water absorption	max. 0.1%	ASTM D5147
Peel resistance	2800 N/m (16 lb/in)	ASTM D903
Storage	Transport and store upright on pallet
Packaging	Reusable