DELTA®-THENE 60 has highly aggressive adhesive properties. The product acts as a full coverage below grade waterproof membrane. When used in combination with DELTA®-DRAIN, DELTA®-6200 or other DELTA® branded drainage composites, it helps provide a high degree of security and drainage for any commercial waterproofing application.
DELTA®-THENE 60 is a 60 mil (1.5 mm) self-adhering (peel & stick) membrane. It consists of SBS (styrene-butadiene-styrene) modified asphalt combined with a cross-laminated polyethylene film.
DELTA®-THENE 60 comes in manageable 36” (920 mm) rolls with a release liner for easy application. It is applied to the below grade foundation walls to provide an effective waterproof barrier. When used in combination with DELTA®-DRAIN, DELTA®-6200 or other ‘000’s series, it is part of an effective foundation protection system.
In combination with DELTA®-THENE ADHESIVE, it can be applied at temperatures as low as -5°C.
|Product name||DELTA®-THENE 60|
|Thickness||1.5 mm (60 mil)|
|Roll weight||29 kg|
|Dimension||20.3 m x 0.914 m|
|Gross / Net coverage per roll||18.7 m² / 17.3 m² (201 ft² / 186 ft²)|
|Top surface||High density polyethylene|
|Tensile strength (membrane)||2.24 MPa||ASTM D412-modified|
|Tensile strength (film)||34.5 MPa||ASTM D882|
|Peel strength||1576 N/m||ASTM D903|
|Temperature range||-40°C (-40°F) to +70°C (+158°F)|
|Working temperature||+5°C (+41°F) to +30°C (+86°F) (air and sub-surface)
|Water absorption||0.2%||ASTM D570-81|
|Crack cycling @-32°C||Unaffected||ASTM D836|
|Minimum puncture resistance (membrane)||222 N||ASTM E154|
|Flexibility @-40°C||Pass||ASTM D1970|
|Water vapor transmission||1.6 ng/Pa.s.m² (0.03 perms)||ASTM E96|
|Lap peel strength @ 5°C||880 N/m||ASTM D1876|
|Hydrostatic head||70 m of water||ASTM D5385|
|Storage||Transport and store upright|
|Packaging||Shrink wrapped roll|
|Service life expectancy||
> 25 years (at temperature < 25°C). Do not expose to UV light for longer than 30 days